The cooling piece of high-power general models, Entering by a misunderstanding, that the power the greater the cooling, the it is not true Key depends on what your use, if you do not understand or did not used - not to purchase If it is fun, and we do not recommend high-power, Of course, each cooling piece has its own dedicated purposes, specifically to consult our technical staff Current cooling-chip power, large power consumption, heat is also high, if not cooling effect of cooling to meet a serious decline, not even small power, if not for your device-specific, we do not recommend the purchase of Generally high power for heating and cooling tank, the heating requirements are not too hot, cooling requirements are not too cold occasion of its biggest advantages is the fast response Cooling is generally recommended water cooling, air cooling is difficult to meet unless the do not ask!
Chip Model: TEC1-12715 Dimensions: 40 * 40 * 3.6mm element number 127 Wire specifications: wire lead length of 100 ± 5mm of RV standard single head 5mm tinned Internal Resistance: 0.8 to 1.2Ω (ambient temperature 23 ± 1 ° C, 1kHZ of Ac test) The maximum temperature difference: Tmax (Qc = 0) 55 °C Operating current: Imax = 15A (maximum voltage start) Rated voltage: DC12V (Vmax: 15.5V) Cooling power: Qcmax 137W Assembly pressure: 85N/cm2 Working environment: temperature range -55 °C to 83 °C (too high ambient temperature will directly affect the cooling efficiency) Packaging technology: around the standard 704 silicone rubber seal Packaging standards: foam boxes for packaging, storage conditions of ambient temperature -10 °C to 40 °C Storage conditions: -40 to 60 ° C
The refrigeration tablets principle introduced
The thermoelectric cooling thermoelectric effect is the application of the Peltier effect refrigeration technology. Practical thermoelectric cooling device is a thermoelectric effect was significantly more efficient thermoelectric cooling semiconductor thermocouple constituted.
Semiconductor thermocouple by the N-type semiconductor and P-type semiconductor. N-type materials have a surplus of electrons, and negative thermoelectric power. P-type materials, electronic, positive thermoelectric power; when electrons from the P-type through the node to the N-type, its energy must increase, and increase the energy equivalent of junction point of the energy consumed. This can be the difference in temperature reduce to prove.
The top of the thermopile cold junction, the following is the hot end. With the heat exchangers and other heat transfer means, so that the thermopile
On the contrary, when the electrons from the N-type flow to the P-type material, the junction temperature will rise. Direct contact with the thermocouple circuit in the actual reference is unavailable, so the above connection method instead, the experiments show that the introduction of a third material (copper lugs and wire) does not change the characteristics of the circuit in the temperature difference circuit.
In this way, the semiconductor element can be a variety of connection methods to meet the requirements of users. Links to a P-type semiconductor and an N-type semiconductor into the thermocouple, connected to the DC power supply, temperature difference and heat transfer in the joints will be in the joints above, the current direction of N to P, the temperature dropped and endothermic, this is the cold side. In one of the following joints, the direction of the current P to N, the temperature rise and heat, so is the hot end.
Several pairs of semiconductor thermocouple according to the figure in the circuit in series, while in the heat transfer in parallel, which constitutes a common cooling thermopile. By icons connected to the DC power supply, this side of the heat continue to heat and maintain a certain temperature, the cold junction of the thermopile into the work environment to endothermic cooling is thermoelectric cooling works.
Shenzhen Yuzens Electronics Co., Ltd. is a professional Electronic component Manufacturer, which have over 5 year business experience.
We specialize in the production of Ard Modules and Electronic Components like IC Chips, Transistors, Diodes, Triodes, Rectifiers, Sensors, Thyristors, TACT switches, Connectors, Resistors and Capacitors, with well-equipped testing equipment and strong technical force. With a wide range good quality, reasonable prices and fast delivery, our products are extensively used in Civilian equipment, Military industry, Industrial Equipment and other industries.
All of our products come from original famous manufacturers with complete warranty. Our products are widely recognized and trusted by users and can meet continuously developing economic and social needs. This also enables us to gain support and trust from our consumers. Besides, we have established long-term stable and cooperative relationships with a number of retailers and agents. This has helped us succeed in the fierce IC line. We have become the first choice for many customers.
Best Quality Assurance:
1. We only provide the original new items, 100% make sure the best quality!
2. 90-days GUARRANTEE OF QUALITY (After Our Delivery Date).
If there is any quality problem (defective / don't work) of the goods, it could be returned within the warranty days. (Notify us as soon as possible)
Any items must be returned in their original condition to qualify for a refund or replacement. (Any used items can not be refunded or replaced).
Payment Methods :
other payment term as you like.
Shipping way :
Economy Shipping way (HK post air mail or ePacket) ,it normally cost 15-25 days